|Place of Origin:||Jiangsu, China|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Wooden box|
|Delivery Time:||7-14 days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||1000 set per month|
|Name:||Polyurea Coating Spray Equipment||Maximum Output:||9kg/min|
|Working Pressure:||25 Mpa||Equipped Pipe Length:||15meters Heating Pipe|
|Ratio Between A And B:||1:1||Raw Material:||Polyurea|
25Mpa polyurea spray machine,
Coating polyurea spray machine,
Coating Polyurethane Spray Foam Machine
1- Work efficiency can reach 60%or more, far greater than the 20% efficiency of the pneumatc machine.
2- Hydraulic drive less troubles.
3- Working pressure up to 25MPA and very stable, large displacement up to 9kg/mint.
4- Machine with soft start, the booster pump is equipped with an overpressure valve. When the pressure exceeds the set pressure, it will automatically release pressure and protect the machine.
5- Electrical components, testing companents, seals all are made in Germany, pumps made in Japan, solenoid valves made in Italy.
6- Only need 17kw air compressor to work together, reducing the overall working load.
7- Equip with 8inch operating touch screen PLC, the sense of technology is stronger. It's convenient to observe the working status of the machine in real time.
|Raw material||polyurethane||polyurea polyurethane||polyurea polyurethane|
|Features||1. with metering control
2. Feed amount adjusted, time-set & quantity-set
3. can be used both for spraying
and casting, with higher production efficiency
|1. Digital counting system( display the consumption of raw materials in real time )
2.More light and easy to carry
3.Using 160 cylinder
4. both polyurethane and polyurea can be used
|1.can be used both for spraying
and casting with higher production efficiency 2.Hydraulic driven is more stable
3. both polyurethane and polyurea can be used
|POWER SOURCE||1 phase 220V 50HZ||3-phase 4-wires 380V 50HZ||3-phase 4-wires 380V 50HZ|
|HEATING POWER (KW)||7.5||18||22|
|AIR SOURCE (min)||0.5~0.8Mpa≥0.9m3||0.5~0.8Mpa≥1m3||0.5~0.8Mpa≥0.5m3|
|MAXIMUM OUTPUT (Mpa)||11||22||24|
|Barrel connector:||2 sets heating||2 sets heating||2 sets heating|
|Spray gun connector:(m)||2||2||2|
|Digital counting system||√||√|
ArmorThane has a number of pure and hybrid Polyurea and Polyurethane products for spraying secondary containment pits, containment booms or building containment berms. These products dry to form a leak-proof membrane that holds any type of liquid spills. It has the flexibility to prevent cracking with weather and ground shift.
Because commercial and industrial floors take more abuse than residential surfaces, ArmorThane Polyurea and Polyurethane sprayed-on and roll-on coatings make more sense than carpet, tile, vinyl, rubber or other coatings. New or repaired surfaces are protected long term, even against corrosive chemicals and cracking or warping. Coatings are applied both inside and outdoors.
Costly construction and industrial equipment is used in the most high-wear surroundings. ArmorThane offers coating solutions to protect and revitalize equipment at a fraction of the cost to replace. With ArmorThane, operators can help protect their people, products, and vehicle investment from expensive exterior damage as well as manpower downtime. Because it’s exceptionally favorable in wet conditions, ArmorThane helps to keep cargo and supplies from sliding around in the back of fleet and utility trucks, creating a more stable handling situation for operators.
Contact Person: admin